Automate Programmable Industriel API



Experience the pinnacle of land power control with DEIF’s range of programmable logic controllers (PLCs). Designed to deliver precision and reliability, our PLCs are engineered for a lifetime of performance in the most demanding conditions. Whether for offshore, marine, or onshore applications, our controllers offer seamless integration and compatibility with a variety of systems. Embrace the power of CODESYS-based PLCs and ensure your operations benefit from cutting-edge technology, engine and generator protection, and easy-to-use graphical configuration. Choose a DEIF PLC, where durability meets innovation for controller solutions that stand the test of time.

  • VLO For Web

    Contact us to discuss your options

    - 90 years of energy pioneering
    - Manufactured at the highest standards
    - Superior quality
    - Unmatched service and support
    - Made in Denmark

    Contact Us

Programmable controllers PLCs

Advanced Controller

Advanced Controller AWC 500

  • Cold start-up/Operating temperature: -40 to 70°C
  • Storage temperature: -40 to 85 °
  • Climate: 55 °C 97 % RH condensing
  • Altitude: < 4000 m
  • Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
  • Shock: 50 g, 11 ms, half sine
  • Bump: 25 g, 6 ms, half sine
  • Direct 3-phase 690 V voltage and 1/5A current measurement, with class 0.5 Power measurement
  • Fully EtherCAT-based I/O and CAN, SSI, TCP/IP, RS-422/485 communication interfaces
  • Operating system software with fail-safe update
  • Fault-tolerant file system
  • Open software development with Linux, C/C++, CODESYS (IEC 61131-3)
 Compare product More details
PPU 300 Standard controller with CODESYS

PPU 300 Standard controller with CODESYS

  • Diesel Generator controller
  • Engine and Generator protection
  • Engine CANbus
  • Generator breaker control
  • Shaft generator controller
  • Generator control and protection
  • Shore connection controller
  • Shore connection breaker control
  • Shore connection protection
  • Bus tie breaker control
  • AC protection
  • PLC
  • Rear mount
  • Flexible Hardware
  • Additional I/O racks (9 racks)
  • Ethernet Ring connection for Power management
  • Redundant breaker feedback
  • Colour Display
  • Marine approval
  • Graphical based easy-to-use plant layout
  • Synchronization
 More details
Advanced Programmable Controller

Advanced Programmable Controller AMC 300

  • Fully production tested control system units
  • Designed for a lifetime no less than 10 years @ 40 ºC
  • Suitable for Offshore, Marine and near shore environments
  • Superior robustness to vibrations, bumps and shocks
  • Better ESD protection, Surge protection of I/O and Power supply
  • Warranty: 2 years (not including wearable parts) with option to 3 years.

  • Core specifications:
    • Cold start-up/Operating temperature: -40 to 70 °C
    • Storage temperature: -40 to 85 °C
    • Climate: 55 °C 97 % RH condensing
    • Altitude: < 4000 m
    • Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
    • Shock: 50 g, 11 ms, half sine
    • Bump: 25 g, 6 ms, half sine

  • Multifunction I/O modules with 24V DC Digital Inputs, Digital Outputs, Relay Outputs, Voltage / Current Analogue Inputs, Thermocouples, PT100/1000 inputs, Frequency Counter inputs, PWM outputs.
  • Direct 3-phase 690 V voltage and 1/5A current measurement with class 0.5 Power measurement
  • Modular I/O concept with distributed I/O nodes based on Standard EtherCAT and supporting EtherCAT cable redundancy
  • CAN/CANopen, TCP/IP, RS-422/485 serial communication interfaces
  • Operating system software with fail-safe update
    • DEIF In-house maintained OS
    • Real-time Patched Linux
    • Discover the device via hostname (mDNS services)
    • Web based configuration
    • Simplified update procedures (no special tools, same for OS and firmware)
    • Secured Certificated based access by standard protocols
    • Customer manages all users, rights and credentials
    • Network config on build-in 5 port switch (VLANs)
    • Network Time protocol support as both Client and Server
    • Fail-safe system software start up with two OS images (active and fault-back)
    • Fault-tolerant file system
  • Open software development with Linux, CODESYS V3 (IEC 61131-3)
    • Regular updates to newest CODESYS V3.5 Service Packs
    • Modbus TCP Client and Server library
    • OPC UA Server (Open62541) library
 Compare product More details
Software - AWC 500 development package

Software - AWC 500 development package CODESYS

IEC61131-3 PLC programming (ST, FDB, SFC, IL, LD)

  • CODESYS-based (compliant with other PLCs. Programmes based on CODESYS V2)
  • Integrated HMI/Web visualisation
  • Graphical PLC configuration
  • Online debugging
  • Multilanguage programming editor (unicode support) and help in Chinese, German and English
  • Monitoring of all variables • Writing and forcing of receipts (sets of variables) into the PLC
  • Debugging your complete project (breakpoints, stepping, single cycle, call stack))
  • Interrupt-free online changes of POUs and data
  • Sampling trace
  • Library management for user-defined libraries
  • Offline simulation • Graphic PLC configuration
  • OPC Server 

The development package includes: 

  • CODESYS V3 
  • AWC 500 TSP (Target Support Package) 
  • CODESYS Control V3 (PLC run-time update) 
  • AWC 500 EtherCAT device description files (.xml/.devdesc.xml)
 Compare product More details
Software AWC 500

Software AWC 500 CODESYS External C lib package

System requirements:

  • Windows XP, 7 or later
  • AWC 500 CODESYS development package
  • AWC 500 C/C++ development package
  • Download 
  • Contact DEIF ( awc500support@deif.com ) for access information for downloading via the AWC 500 FTP area
 Compare product More details